For drawing of steel non-ferrous metal and alloy wire of <=Ø 2mm,esp, for fine wires of <=Ø0.6mm,under low stress condition

     For drawing of steel wires and non-ferrous metal wires or bars of <=Ø 6.0mm under low-stress condition.

     For drawing of steels, non-ferrous metal and alloy bars of <=Ø 20mm or tubes of<=Ø10mm ,under the condition of higher stress.

     For drawing and straightening steels, non-ferrous metal and alloy bars and tubings; and for fabricating of machine parts, tools and wear parts, such as nozzles centres, guiding devices, upsetting dies and perforating tools.

     For drawing of steel bars and pipes at high reduction; and also for upsetting, perforating and stamping tools under higher-stress conditions.

     For fabricating of stamping dies for watch parts, spring plates of musical instruments, batters jars, small sized steel balls, screws, screwcaps, etc; and for press plates for hot rolling of twist drill bits.

     For cold forging, punching pressing dies for standard components bearings and tools industries etc; and for punching dies for bullet heads and cartridges. 

     Magnetic conductivity non-magnetic alloy with very high strength ,excellent  wear resistance and very low magnetic conductivity . used for forming die for permanent-magnetic materials with a high service endurance up to 0.5~1M times